WIZ-QS+ Interferometer

Single fiber inspection

Autofocus

PASS/FAIL verdict

Fast measurement

Industry standards

Connects to tablet or laptop

Whitelight single-fiber interferometer for inspection of single fiber connectors, ferrules, bare fiber (both PC and APC) in production environment.

The device connects to a laptop or desktop computer via USB 3.0 cable and 12V DC power adapter and is supplied with Sumix MaxInspect™ software for interferometric inspection of fiber optic connectors.

Download WIZ-QS+ brochure

Software

Use the controls below to get the overview of the software step-by-step

Variety of tasks for all major connector types per IEC/Telcordia industry standards.
You may choose to see only active tasks supported by your equipment.

Just press Measure to get the connector focused and measured within several seconds.

Use Express mode for testing large number of connectors.
Check the test result on the same screen and proceed to the next connector.

You may open the Summary Report panel to see real-time statistics.

Full Report contains measured geometry parameters.
Print or export the report to certify your connector.

Zoomed 2D substracted image in report

Zoomed 3D surface in report

Start page
Task selection
Live view
Express result
Summary report
Detailed report
Images in report
Images in report

More images you can find here

Features

Suitable for volume production

Save time with easy ferrule/connector insertion and fixture handling.

Autofocus

Minimize operator’s actions to just one click.

Interactive 2D and 3D surface profiles

Rotate, zoom, scale images to explore surface details as small as 2.7 μm.

Fast measurements

Measure single fiber connectors and ferrules as quickly as 1.8 seconds with USB 3.0 SuperSpeed connection.

One-click operation

Save time testing large quantities of connectors in Express Mode.

Industry-leading MaxInspect™ automated inspection software

Measure radius of curvature, apex offset, fiber height, core dip, etc.

Factory precision-aligned fixtures

Be free of the necessity to calibrate your fixtures before each use or when changing between fixtures.

Wide range of applications

Inspect single fiber connectors, ferrules, bare fibers, Arinc, MS termini, both PC and APC.

Compliance to industry standards

Test per IEC, Telcordia or your own Pass/Fail criteria.

Specification

Field of view:

D = 0.75 mm

Lateral resolution:

2.7 µm

Best suitable for connectors/ferrules:

ST, FC, SC, MU, LC, E2000™, Arinc, MS termini - PC and APC

Measurement mode:

phase shift and white light

Scanning and calculation speed:

1.8 sec*

Microscopy Mode:

Maximum image size:

1600 × 1200 px

Power supply:

external, USB 3.0 cable, 12 V DC power adapter

Weight:

3.9 kg (8.6 lbs)

Dimensions (H × W × L):

150 × 120 × 90 mm (5.9 × 4.72 × 3.5 in)

Focus:

autofocus

Focus range:

±1 mm

Repeatability C.F.*:
* Values were calculated from 30 consecutive measurements without interaction on connector between measurements (connector fixed) and represent one sigma value.

ROC: 0.2 %
Fiber Height: 0.4 nm
Angles: 0.0002 deg
Apex Offset: 0.02 µm

Repeatability C.R.*:
* Values were calculated from 30 consecutive measurements with removing and inserting connector between measurements (connector reloaded) and represent one sigma value.

ROC: 0.2 %
Fiber Height: 0.5 nm
Angles: 0.007 deg
Apex Offset: 1.1 µm