| MAX-QM+ | MAX-QS+ | WIZ-QS-110 | |
|---|---|---|---|
| Measurement technique: | non-contact; Michelson interferometry | non-contact; Michelson interferometry | non-contact; Michelson interferometry |
| Lens: | NA = 0.15; flatness error < λ/50 | NA = 0.25; flatness error < λ/50 | |
| Illuminator: | green LED (530 nm) | green LED (530 nm) | |
| Field of view: | 5.6 × 4.2 mm | 1.1 × 0.9 mm | 1.2 x 0.9 mm |
| Lateral resolution: | 2.2 µm | 1.1 µm | 2.5 µm |
| Magnification: | 100× | 500× | 460× |
| Focus: | autofocus and manual | autofocus and manual | autofocus |
| Maximum image size: | 2590 × 1940 px | 2590 × 1940 px | 2590 × 1940 px |
| Best suitable for connectors/ferrules (PC and APC): |
MTP®/MPO, MT, MT16/32, MT-RJ, SMA, SC, FC, ST, LC, MU, E2000™, MIL Spec termini | SC, FC, ST, LC, MU, E2000™, SMA, MT-RJ | ST, FC, SC, MU, LC, E2000™, Arinc, MS termini - PC and APC, bare fiber |
| Microscopy Mode: | No | Yes | Hybrid |
| Measurement | |||
| Measurement mode: | phase shift and white light | phase shift and white light | white light |
| Scanning and calculation time: Measurement time may vary depending on computer performance and connector end face shape. |
1 sec for single fiber, 3 sec for MT12, 6.9 sec for MT16, 4.9 sec for MT24, 5.7 sec for MT72. |
2* sec * 64 MHz, standard single fiber connector. |
1.3 sec* *64 MHz, standard single fiber connector. |
| Measurement Range: | ROC (mm): 1 to flat Apex offset (µm): 0 to 2000 Fiber height* (µm): more than 1000** Angles measurements - full range (degrees): 0 to 28*** * Difference from the highest and lowest points of the scanned object. **<100 µm available by default. >100 µm - for special connectors/tasks (software adjustment required). *** Regular fixtures - 0, 8, 9 degrees. Customized fixtures - 0 -28 degrees. |
||
| Repeatability C.F.*: * Values were calculated from 30 consecutive measurements without interaction on connector between measurements (connector fixed) and represent one sigma value. |
ROC: 0.9 % (MT12); 0.04 % (SC/PC) Fiber Height: 0.8 nm (MT12); 0.1 nm (SC/PC) Angles: 0.005 deg (MT12); 0.0002 deg (SC/PC) Apex Offset: 0.04 µm (SC/PC) |
ROC: 0.1 % Fiber Height: 0.1 nm Angles: 0.0002 deg Apex Offset: 0.08 µm |
ROC: 0.2 % Fiber Height: 0.4 nm Angles: 0.0002 deg Apex Offset: 0.02 µm |
| Repeatability C.R.*: * Values were calculated from 30 consecutive measurements with removing and inserting connector between measurements (connector reloaded) and represent one sigma value. |
ROC: 1.2 % (MT12); 0.05 % (SC/PC) Fiber Height: 1.1 nm (MT12); 0.4 nm (SC/PC) Angles: 0.01 deg (MT12); 0.006 deg (SC/PC) Apex Offset: 1.1 µm (SC/PC) |
ROC: 0.16 % Fiber Height: 0.4 nm Angles: 0.006 deg Apex Offset: 0.8 µm |
ROC: 0.2 % Fiber Height: 0.5 nm Angles: 0.007 deg Apex Offset: 1.1 µm |
| Dimensions and Weight | |||
| Dimensions (H × W × L): | 103 × 137 × 183 mm (4.06 × 5.39 × 7.2 in) |
103 × 137 × 183 mm (4.06 × 5.39 × 7.2 in) |
93 × 137 × 183 mm (3.66 × 5.4 × 7.2 in) |
| Weight: | 3.8 kg (8.4 lbs) | 3.9 kg (8.6 lbs) | 3.9 kg (8.6 lbs) |
| Power | |||
| Power supply: | external, USB 3.0 cable, 12 V DC power adapter | external, USB 3.0 cable, 12 V DC power adapter | external, USB 3.0 cable, 12 V DC power adapter |