| Models: | SMX-Scopio | SMX-Scopio-A |
|---|---|---|
| Field of view: | 0.4 x 0.4 mm | 0.4 x 0.4 mm |
| Defect size detection: | 1 micron | 1 micron |
| Optical Magnification: | 12.5x | 12.5x |
| Light source: | Blue LED, wave length 470 nm | Blue LED, wave length 470 nm |
| Camera type: | Digital | Analog |
| Sensor type: | 1280 x 1024 Monochrome 1/2'' CMOS | Monochrome 1/3'' Sony CCD |
| Live image: | 800 x 800, 28 fps default 1280 x 1024, 14 fps full resolution | 320 x 240 full resolution |
| Power source: | USB2.0 Port of PC | Mini Jack of 3.5" TFT display |
| Cable: | USB2.0 | Mini Jack |
| Dimensions (W x H x L): | 25 x 56.3 x 201 mm (0.98 x 2.22 x 7.91 inches) | 25 x 56.3 x 201 mm (0.98 x 2.22 x 7.91 inches) |
| Weight: | 330 g (0.73 lbs) | 330 g (0.73 lbs) |
You can download Inspection Probes brochure in PDF file
Optics and Design
Purpose built high-quality optics
See defects as small as 1μm - lab quality measurements in the field.
Long barrel and flat housing
Easily inspect connectors in dense patch panels and hard to reach equipment or vehicles. Flat housing also prevents the probe slipping off the work surface - it stays where you place it.
"Finger-friendly" focusing system
Focus fast, focus sure. More measurements – less time.
Robust design (aluminum body, stainless steel barrel)
If it drops – do not worry. No plastic to break. Two year warranty included.
Wide variety of tips
Inspect single and multi-fiber connectors, both genders of PC and APC termini. Do not see your tip on our website ? Just ask us.
SMX-Scopio Inspection software
(available with SMX-Scopio)
Is your connector good? Let the software decide and document results. Eliminate user subjectivity. Use preinstalled Pass/Fail criteria based on IEC and TIA standards or create your own limits.
Operating temperature: +5 to +35°C
Weight: 330 g (0.73 lbs)
Dimensions (W x L x H): 25 x 56.3 x 201 mm
(0.98 x 2.22 x 7.91 inches)
Housing material: aluminum
Barrel material: stainless steel
SMX-Scopio Tips for APC (Angled Polished Connectors) end face
SMX-Scopio Tips for PC (Polished Connectors) end face
SMX-Scopio Tips for FP (Flat Polish) end face
Other SMX-Scopio Tips
SMX-Scopio Tips for APC (Angled Polished Connectors) end face
SMX-T-2.5/APC-M
for inspection of SC, FC, ST, E2000 connectors with a 2.5 mm ferrule and APC end face
SMX-T-SC/APC-F
for inspection of the SC/APC connectors in adapters
SMX-T-1.25/APC-M
for inspection of the LC and MU connectors with a 1.25 mm ferrule and APC end face
SMX-T-E2000/APC-F
for inspection of the E2000/APC connectors in adapters
SMX-T-FC/APC-F
for inspection of the FC/APC connectors in adapters
SMX-Scopio Tips for PC (Polished Connectors) end face
SMX-T-2.5/PC-M
for inspection of SC, FC, ST, E2000 connectors with a 2.5 mm ferrule and PC end face
SMX-T-SC/PC-F
for inspection of the SC/PC connectors in adapters
SMX-T-FC/PC-F
for inspection of the FC/PC connectors in adapters
SMX-T-1.25/PC-M
for inspection of the LC and MU connectors with a 1.25 mm ferrule and PC end face
SMX-T-LC/PC-F
for inspection the LC/PC connectors in adapters
SMX-T-E2000/PC-F
for inspection of the E2000/PC connectors in adapters
SMX-T-1.6/PC-F
for inspection of MIL-T-29504-4/5 termini, associated with 38999 style connectors
SMX-T-1.5/PC-M
for inspection of the 1.5/PC connectors
SMX-T-ST/PC-F
for inspection of the ST/PC connectors in adapters
SMX-T-DIN/PC-F
for inspection of the DIN/PC connectors in adapters
SMX-T-AVIM/PC-F
for inspection of the AVIM/PC connectors in adapters
SMX-Scopio Tips for FP (Flat Polish) end face
SMX-T-3.2/SMA-M
for inspection of the SMA connectors with 3.2 mm ferrule and FP end face
SMX-T-3.2/SMA-E-M
A Tip with shifted center for inspection of multifiber SMA connectors with 3.2 mm ferrule and FP end face
Other SMX-Scopio Tips
SMX-T-MIL-1.6-S
for inspection of 29504-/4/5 termini (socket), most typically associated with 38999 style connectors.
SMX-T-MIL-1.6-P
for inspection of 29504-/4/5 termini (pin), most typically associated with 38999 style connectors.
SMX-T-MIL-1.25-S
for inspection of Glenair GHD termini (socket), most typically associated with MIL-DTL-38999 style connectors.
SMX-T-MIL-1.25-P
for inspection of Glenair GHD termini (pin), most typically associated with MIL-DTL-38999 style connectors.
SMX-T-MTP/MPO/PC-U
for inspection of MTP/MPO PC connectors (both genders).
Please contact us at for pricing and ordering.
Placing an Order
To place an order you can email/fax your official order (on your company's letterhead).
Warranty
Sumix Corporation provides two years of warranty, technical support and assistance for all the kits. Product warranty remains valid provided the product was properly installed and used.