High-end white light interferometer SMX-QM50 is an ideal two-in-one solution for manufacturers of multi fiber and single fiber connectors. Its large field of view is suitable for inspection of MT/PC, MT/APC, MT-RJ, SMA 905, SMA 906 connectors in a single scan. The high lateral resolution is an additional advantage for measurements of ST, FC, SC, LC, MU, APC and other single fiber connectors.
The optical objective is built integrated inside the stage, which provides extreme vibration resistance. No vibration damping table is needed and device can work in a noisy manufacturing or repair facility.
SMX-QM50 features autofocus with long range, which simplifies and speeds up the measurement procedure.
SMX-QM50 interferometer is supplied with the ISI (Interferometric Surface Inspection) analytical software.
* Autofocus time is not included to measurement time
** Repeatability C.F. (connector fixed) values calculated from 30 consecutive measurements without interaction on connector between measurements.
*** Repeatability C.R. (connector reloaded) values calculated from 30 consecutive measurements with removing and inserting connector in fixture between measurements.
LC/PC Duplex fixture
for measurements of the LC Duplex connectors with PC end face.
FC/APC fixture
for measurements of the FC connectors with APC end face.
3.2/SMA 905 fixture
for measurements of the SMA 905 connectors.
1.6/PC fixture
for measurements of the 1.6 mm connectors with PC end face.
SC/APC fixture
for measurements of the SC connectors with APC end face.
MU/APC fixture
for measurements of the MU connectors with APC end face.
LC/APC fixture
for measurements of the LC connectors with APC end face.
2.5/PC fixture
for measurements of the SC, FC and ST connectors with PC end face.
1.25/PC fixture
for measurements of the LC and MU connectors with PC end face.
MT/PC M and
MT/PC F fixtures
for measurements of the MT connectors with PC end face.
MT/APC M and
MT/APC F fixtures
for measurements of the MT connectors with APC end face.
MTRJ/APC fixture
for measurements of the MTRJ ferrules with APC end face.
MT/APC fixture
for measurements of the MT ferrules with APC end face.
MT/PC fixture
for measurements of the ferrules with PC end face.
MTRJ/PC fixture
for measurements of the MTRJ ferrules with PC end face.
E2000/PC fixture
for measurements of the E2000 connectors with PC end face.
E2000/APC fixture
for measurements of the E2000 connectors with APC end face.
2.0/PC fixture
for measurements of the 2.0 mm connectors with PC end face.
MT12 connector Scan Results: Unwrapped Phase Map RealTime WL 3D
MT12 connector Scan Results: Zoomed by the ISI Software the Unwrapped Phase Map RealTime WL 3D
MT12 connector Scan Results: Data Frame 2D
MT12 connector Scan Results: Unwrapped Phase Map RealTime WL 2D
MT12 connector Scan Results: Multifiber 3D
MTP connector Scan Results: Zoomed by the ISI Software Unwrapped Phase Map RealTime WL 3D
MTP connector Scan Results: nwrapped Phase Map RealTime WL 3D
MTP connector Scan Results: Modulation Map RealTime 2D
MTP connector Scan Results: Unwrapped Phase Map RealTime WL 2D
Quality Control Report of the MTP Connector
Viewing of Guide Holes at Modulation Map RealTime 2D View
Viewing of Guide Holes at Unwrapped Phase Map RealTime 2D View
Viewing of Guide Holes at Unwrapped Phase Map RealTime 3D View
7 fiber SMA connector scan results: Surface 3D View
1 fiber SMA connector scan results: Surface 3D View
2 fiber SMA connector scan results: Surface 3D View
Sumix SMX-QM50 interferometer is supplied with the ISI (Interferometric Surface Inspection) analytical software.
Interferometeric Surface Inspection (ISI) is a general purpose analytical software using various algorithms such as phase shift narrow band or white light methods. ISI provides 3D surface reconstruction of fiber optic connector end face and measures various parameters such as radius of curvature of polish, fiber heights, polish off set, etc. In addition ISI stores test results in database and organizes them with identifiers that represent several configurable variables, such as job name, operator, customer, description, etc.
Reports are generated for a test group (job) or for single test, including all or partial measurement results. 3D scratch detection is provided according to various zones and user defined criteria. The ISI software is flexible as scan parameters and view layouts are provided by configuration files.
Measurements of single fiber connectors display and characterize the polished connector end-face providing surface information, such as ferrule radius of curvature, apex offset of polish, apex offset angle, fiber protrusion/under-cut, etc. 3D scratch detection is provided according to various zones and user defined criteria.
Measurements of multifiber connectors display and characterize the polished connector end-face providing surface information, such as angle of the polish, fiber protrusion, planar height differential, flatness deviation, etc.
Please contact us at for pricing and ordering.
To place an order you can email/fax your official order (on your company's letterhead).
Sumix Corporation provides one year of warranty, technical support and assistance for all the interferometer kits. Product warranty remains valid provided the product was properly installed and used.
Interferometers brochure
