High resolution 2D/3D surface profiles
The 3D surface view enables you to see the volume image of the fiber and the ferrule. Explore surface details.
Fast scan modes
Measure single fiber in 1-4 seconds.
Wide range of fixtures
Inspect single-fiber connectors, ferrules, bare fibers, MS termini, both PC and APC.
High contrast optics
Inspect connnectors made of different materials (glass, metal, plastic) and buffer zones.
Compliance to industry standards
Test per IEC, Telcordia or your own Pass/Fail criteria.
Automated inspection software
Measure radius of curvature, apex offset, fiber height, etc.
Configurable report generation and data archival
Document your results your way.
non-contact; Linnik interferometry
NA=0.25; reference flatness error < λ/50
green LED (530 nm)
Field of view:
750× (the digital zoom turned off)
Maximum image size:
3000 × 2200 px
Best suitable for connectors/ferrules (PC and APC):
SC, FC, ST, LC, MU, E2000, MT-RJ
phase shift and white light
Radius of curvature: 1 mm – flat
Apex offset: 0 - 250 µm
Scanning and calculation time:
Measurement time doesn't include time for auto focus; may vary depending on computer performance and connector end face shape.
0.9* - 3.5** sec (single fiber)
29*** sec (MTRJ)
* High Speed mode, Monochrome 9 Frames algorithm, 48MHz (standard connector)
** High Precision mode, White Light algorithm, 48MHz (standard connector)
*** High Precision mode, White Light algorithm, 24MHz (standard MTRJ connector)
*Values calculated from 30 consecutive measurements without interaction on connector between measurements (connector fixed).
ROC: 0.3 %
Fiber Height: 0.3 nm
Apex Offset: 0.12 µm
*Values calculated from 30 consecutive measurements with removing and inserting connector between measurements (connector reloaded).
ROC: 0.16 %
Fiber Height: 0.2 nm
Angles: 0.006 deg
Apex Offset: 1.93 µm
700 – 850 mm mercury
60 – 80%
Dimensions and Weights
Dimensions (H × W × L):
105 × 145 × 215 mm (4.13 × 5.7 × 8.46 inches)
4.9 kg (10.8 lbs)
12 V, 1 A maximum
Intel Core i5/Core i7
4GB RAM or higher
Built-in Intel USB 2.0 controller
SMX-F-1.25/APC-Ar1.25/APC connector fixture for measuring 1.25 mm ARINC 801 connectors with APC end face (with 30° key).
Used with SMX-QS04-B, SMX-7QS, SMX-7QS-T,
SMX-F-2.5/APC-FC-RSMX-F-2.5/APC-FC-NFC/APC-R connector fixture for measuring FC connectors of type R (key width is 2 mm) with APC end face.
FC/APC-N connector fixture for measuring FC connectors of type N (key width is 2.14 mm) with APC end face.
Used with SMX-QS04-B, SMX-7QS, SMX-7QS-T, SMX-8QM-B
using fractional field of view
MT-RJ connector Measurement Results: Unwrapped Phase Map RealTime WL, 3D
SMA FP 2 Fibers connector Measurement Results: Surface restoration in white light 3D view
SC/PC connector Measurement Results: ModulMap 3D view
SC/PC connector Measurement Results: viewing scratches
SC/PC connector Measurement Results: viewing scratches (magnified)
ST/PC connector Measurement Results: Surface 3D view
LC/PC connector Measurement Results: Surface 3D view
SC/PC connector Measurement Results: Surface 3D view
Quality Control Report with LC/PC connector scanned
1 fiber SMA connector Measurement Results: Surface 3D View