SMX-160M is a monochrome 6.6 megapixel ( 2208 x 3000) CMOS camera with USB2.0 interface. It is designed for capturing, streaming and storing high quality digital images.
You can download PDF documents:
- CommandShot cameras brochure in low-resolution or in high-resolution
- SMX-160 USB2.0 camera datasheet
Features
- 2208x 3000 active imaging pixels
- Speed: 6 fps at 2208 x 3000 (48 MHz)
- Low noise
- Electronic Rolling Shutter
- Adjustable frame rate
- Small size
- USB2.0 interface
- Cost effective
Output Video and Camera Control Characteristics
| Maximum resolutions of output window: | 2208x 3000, full resolution mode 1104 x 1500, decimated by 2 mode |
| Frame rate at resolution (48 MHz)*: | 6 fps at 2208 x 3000, full resolution 31 fps at 1280 x 1024 24 fps at 1104 x 1500 52 fps at 1024 x 768 91 fps at 768 x 576 126 fps at 640 x 480 219 fps at 400 x 400 426 fps at 320 x 240 |
| Output bits per pixel: | Selectable, 8 bits or 10 bits |
| Lookup table: | Downloadable for user selected 8 bits mode: converts 10 bits of imaging chip's ADC to 8 bits of output |
| Pixel rates: | 3.33 MHz, 6.66 MHz, 8 MHz, 10 MHz, 12 MHz, 13.33 MHz, 16 MHz, 20 MHz, 24 MHz, 32 MHz, 40 MHz, 48 MHz |
Exposure range |
min: 0.93 (at 48 MHz) max: 2497.57 (at 3.33 MHz) |
| Pixel gain control: | Programmable hardware gain: 17 gain levels from 0 to 17.38 |
| Output window modes: | View port (from 2208 x 3000 to 8 x 8 with 8 pixels/1 line step positioning) Frame Decimation (1:1, 1:2, 1:3, 1:4, 1:6) Horizontal "mirroring" Vertical "flipping" |
| Gamma, brightness and contrast control: | Programmable with lookup table |
* Listed frame rate values at the defined resolutions are not the maximal possible. Increasing of frame rate can be done by reducing the current Exposure value (the lower Exposure the higher frame rate is), hiding the active video window, running the camera on a faster computer, etc.
Imaging Chip Characteristics
| Type: | Monochrome 6.6 megapixel CMOS sensor with an optical format of 1" Manufactured by Cypress (FillFactory) |
| Pixel size: | 3.5µm x 3.5µm |
| Image array size: | 7.74 mm x 10.51 mm |
| Shutter: | Electronic Rolling Shutter |
| Scanning mode: | Progressive |
| ADC resolution: | 10 bits |
| Sensitivity (peak) @ 650 nm (85 lux = 1 W/m2): |
411 V.m2/W.s, 4.83 V/lux.s |
| Sensitivity (visible) 400-700 nm (163 lux = 1 W/m2) |
328 V.m2/W.s 2.01 V/lux.s |
| Dynamic Range: | 1100:1 Full: 61 dB. 940:1 Linear: 59.5 dB. |
Camera Electrical Characteristics
| Supply voltage: | 5 V supplied by USB2.0 interface |
| Supply current: | 360 mA (at 5.0 V) |
| Maximum power consumption: | 2.28 W |
Camera Interface Characteristics
| Interface Type: | USB2.0, 480 Mbps |
| Connector Type: | USB mini-B, 5 pin |
System Requirements
| Operating System: | Windows XP Professional SP1 or SP2 Windows Server 2003 SP1 |
| Processor: | Pentium 4, recommended Core 2 Duo |
| RAM: | 256 MB, recommended 384 MB |
| Hard Disk Space: | 5 MB for installation plus additional space for captured images |
| Video: | 24 bit True Color, 8 MB video memory |
| Video Card: | Video chipset: ATI 9X series (or higher) or NVidia GeForce 4x (or higher); Up to date Video card divers |
| Hardware Interface: | USB2.0 Host Controller, recommended Intel integrated host controller (VIA-based USB controller is not recommended) At least one USB2.0 port for connection. |
See also Camera Physical Characteristics
Cameras at a Glance